HONDA 2008 CR-V - Manual (Page 48)

Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats have
a rigid-type connector as shown
above.
Other LATCH-compatible seats have
a flexible-type connector as shown
above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Remove the head restraint (see
page
). Make sure the removed
head restraint is secured in the
cargo area.
Reinstall the head restraint when the
child seat is removed.
Remove the dual deck cargo shelf
(see page
).
5.
4.
3.
6.
98
114
If equipped
Installing a Child Seat
44
Flexible type Rigid type
2008 CR- V
Table Of Contents Main Menu