HONDA 2008 CR-V - Manual (Page 281)

CONTINUED
If you have the required service
done but do not reset the display, or
reset the display without doing the
service, the system will not show the
proper maintenance intervals. This
can lead to serious mechanical
problems because you will no longer
have an accurate record of when
maintenance is needed.
Your authorized Honda dealer
knows your vehicle best and can
provide competent, efficient service.
Press the select/reset knob for
about 10 seconds. The information
display shows the reset mode
initial display as shown. Select the ‘‘OIL LIFE’’ indicator by
turning the select/reset knob. The
display begins to blink. Push the
same knob to enter this setting.
The engine oil life and the
maintenance item code(s) will
begin to blink. Push the select/
reset knob to reset.
The maintenance item code(s) will
disappear, and the engine oil life
will reset to ‘‘100.’’
4. 3.
5.
6.
Maintenance Minder
Important Maintenance
Precautions
Ma
int
e
na
nce
277
EX and EX-L model
2008 CR- V
Table Of Contents Main Menu