HONDA 2012 Fit User Manual
Page 210
209
uu
Maintenance Under the Hood
u
Transmission Fluid
Main
tenan
ce
Check the fluid level when the engine is at normal operating temperature.
1. Park the vehicle on level ground.
2. Remove the transmission filler bolt and
washer. Carefully feel inside the bolt hole
with your fingers.
u
Check if the fluid level is up to the edge
of the bolt hole.
3. If the fluid level is not up to the edge of the
bolt hole, add Honda Manual Transmission
Fluid (MTF) until it runs out of the hole.
4. Put a new washer on the filler bolt, then
reinstall the filler bolt.
u
Tightening torque:
33 lbf∙ft (44 N∙m, 4.5 kgf∙m)
■
Manual Transmission Fluid
Specified fluid: Honda Manual Transmission Fluid (MTF)
1
Manual Transmission Fluid
If Honda MTF is not available, you may use the API
certificated SAE 10W-30 or 10W-40 viscosity motor
oil as a temporary measure.
Replace with MTF as soon as possible. Motor oil does
not contain the proper additives for the transmission
and continued use can cause decreased shifting
performance and lead to transmission damage.
Filter Bolt
Washer
US FIT-31TK6630.book 209 ページ ２０１１年６月１５日 水曜日 午後４時２３分
2012 Fit
Home
QRG
Index
TOC