HONDA 2012 Fit User Manual
Page 66
65
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Malfunction
Indicator Lamp
●
Comes on when you turn the ignition
switch to ON
(
w
, and goes off either
when the engine starts or after several
seconds if the engine is not started. If
“readiness codes” have not been set, it
blinks five times before it goes off.
●
Comes on if there is a problem with the
emissions control system.
●
Blinks when a misfire in the engine’s
cylinders is detected.
●
Readiness codes are part of the on board diagnostics
for the emissions control systems.
2 Testing of Readiness Codes P. 273
●
Comes on while driving - Have the vehicle
checked by a dealer.
●
Blinks while driving - Stop in a safe place where
there are no flammable objects. Stop the engine for
10 minutes or more, and wait for it to cool down.
Then, take the vehicle to a dealer.
2 If the Malfunction Indicator Lamp Comes On or
Charging System
Indicator
●
Comes on when you turn the ignition
switch to ON
(
w
, and goes off when the
engine starts.
●
Comes on when the battery is not
charging.
●
Comes on while driving - Turn off the heating
and cooling
*
system and rear defogger in order to
reduce electricity consumption.
2 If the Charging System Indicator Comes On
Shift Position
Indicator
*
●
Indicates the current shift lever position.
2 Shifting P. 165
*
Not available on all models
US FIT-31TK6630.book 65 ページ ２０１１年６月１５日 水曜日 午後４時２３分
2012 Fit
TOC
Home
QRG
Index