HONDA 2012 Fit User Manual
Page 220
Advertising
219
uu
Checking and Maintaining Wiper Blades
u
Changing the Front Wiper Blade Rubber
Main
tenan
ce
4. Slide the wiper blade out from its holder by
pulling the tabbed end out.
5. Remove the retainers from the rubber blade
that has been removed, and mount to a
new rubber blade.
u
Correctly align the rubber protrusion and
the retainer grooves.
6. Slide the new wiper blade onto the holder
from the bottom end.
u
The tab on the holder should fit in the
indent of the wiper blade.
7. Slide the wiper blade onto the wiper arm,
then push down the lock tab.
8. Lower the passenger side wiper arm first,
then the driver side.
Blade
Top
Retainer
Blade
US FIT-31TK6630.book 219 ページ 2011年6月15日 水曜日 午後4時23分
2012 Fit
Home
QRG
Index
TOC
Advertising
This manual is related to the following products: