HONDA 2012 Fit - Manual (Page 226)

225
uu Checking and Maintaining Tires u DOT Tire Quality Grading (U.S. Vehicles)
Continued
Main
tenan
ce
DOT Tire Quality Grading (U.S. Vehicles)
US FIT-31TK6630.book 225 ページ ２０１１年６月１５日 水曜日 午後４時２３分
2012 Fit
Home
QRG
Index
TOC
The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires
Quality grades can be found where applicable on the tire sidewall between tread
shoulder and maximum section width.
The treadwear grade is a comparative rating based on the wear rate of the tire
when tested under controlled conditions on a specified government test course.
For example, a tire graded 150 would wear one and one-half (1 1/2) times as well
depends upon the actual conditions of their use, however, and may depart
significantly from the norm due to variations in driving habits, service practices
and differences in road characteristics and climate.
■
Uniform Tire Quality Grading
■
Treadwear
1 Uniform Tire Quality Grading
For example:
Treadwear 200
Traction AA
Temperature A
All passenger car tires must conform to
Federal Safety Requirements in addition to
these grades.
are also graded for treadwear, traction, and temperature performance according
to Department of Transportation (DOT) standards. The following explains these
gradings.
on the government course as a tire graded 100. The relative performance of tires