HONDA 2012 Ridgeline - Manual (Page 352)

Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Push the socket into the light
assembly, and turn it clockwise
until it locks.
Remove the mounting screw from
the bed light assembly.
Pull out the light assembly.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Turn on the lights to make sure
the new bulb is working.
Reinstall the light assembly in the
bumper.
1.
2.
3.
4.
5.
5.
6.
Replacing a Bed Light Bulb
Lights
344
SCREW
SCREW
BULB
SOCKET
11/09/14 18:16:48 31SJC660_351