Installing a child seat – HONDA 2012 Ridgeline User Manual

Page 53

Advertising
background image

Lift the head restraint (see page

), then route the tether strap

over the seat-back and through
the head restraint legs.
Lift the cover, then route the
tether strap around the upper
guide. Route the tether strap
downward properly, making sure
the strap is not twisted, then
attach the strap hook to the tether
anchor on the outside of the seat
bottom (see page

).

Push and pull the child seat
forward and from side-to-side to
verify that it is secure.

Tighten the strap according to the
seat maker’s instructions.

6.

7.

8.

48

123

On the outer seating position

Installing a Child Seat

Dr
iv

er
and

P

asseng

er
Saf

e

ty

45

Outer Position

Center Position

TETHER ANCHOR

TETHER ANCHOR

UPPER GUIDE

UPPER GUIDE

11/09/14 17:38:32 31SJC660_052

Advertising
This manual is related to the following products: