Changing a flat tire – HONDA 2012 Ridgeline User Manual
Page 374
Advertising
Attach the stay to the extension,
then attach the wheel nut wrench
to the end of the extension.
Turn the jack dial (wheel nut
wrench) clockwise as shown to
raise the vehicle until the flat tire
is off the ground.
Make sure the stay, the extension,
and the wheel nut wrench are
securely attached.
Insert the hook at the end of the
stay into the opening on the dial at
the bottom of the jack.
11.
12.
13.
Changing a Flat Tire
366
EXTENSION
DIAL
CONNECTOR BUTTON
HOOK
STAY
WHEEL NUT WRENCH
CONNECTOR BUTTON
11/09/14 18:19:29 31SJC660_373
Advertising
This manual is related to the following products: