Changing a flat tire – HONDA 2012 Ridgeline User Manual
Page 376
Advertising
Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
Place the flat tire face up on the
tire tray.
Remove the spacer cone from the
wing bolt, turn it over, and put it
back on the bolt.
Secure the flat tire by screwing
the wing bolt back into its hole.
Release the tire tray and slide it
back in place.
Tighten the tire tray holding bolts
securely.
Remove the center cap from the
flat tire.
18.
19.
20.
21.
22.
23.
24.
On all models except RT and DX
Changing a Flat Tire
368
WING BOLT
SPACER CONE
For normal
tire
For spare
tire
94 lbf·ft (127 N·m , 13 kgf·m)
11/09/19 18:17:11 31SJC660_375
Advertising
This manual is related to the following products: