Towing a trailer – HONDA 2011 CR-V User Manual

Page 337

Advertising
background image

Towing can require a variety of
equipment, depending on the size of
your trailer, how it will be used, how
much load you are towing, and
where you tow.

Trailer lights and equipment must
comply with federal, state, province/
territory, and local regulations.
Check trailer light requirements for
the areas where you plan to tow, and
use only equipment designed for
your vehicle.

Discuss your needs with your trailer
sales or rental agency, and follow the
guidelines in this section. Also make
sure that all equipment is properly
installed and maintained, and that it
meets federal, state, province,
territory, and local regulations.

Always use safety chains when you
tow a trailer. Make sure the chains
are secured to the trailer and hitch,
and that they cross under the tongue
and can catch the trailer if it

becomes unhitched. Leave enough
slack to allow the trailer to turn
corners easily, but do not let the
chains drag on the ground.

Any hitch used on your vehicle must
be properly bolted to the underbody.

See your trailer dealer or rental
agency for more information on
installing electric brakes.

If you choose electric brakes, be
sure they are electronically actuated.
Do not attempt to tap into your
vehicle’s hydraulic system. No
matter how successful it may seem,
any attempt to attach trailer brakes
to your vehicles hydraulic system
will lower braking effectiveness and
create a potential hazard.

There are two common types of
trailer brakes: surge and electric.
Surge brakes are common for boat
trailers, since the brakes will get wet.

CONTINUED

Towing a Trailer

Trailer Lights

Saf ety Chains

Trailer Brakes

Hitches

Towing Equipment and
Accessories

D

riv

ing

331

10/07/09 18:52:32 31SWA640_336

Advertising
This manual is related to the following products: