Installing a child seat – HONDA 2011 CR-V User Manual

Page 52

Advertising
background image

To install a LATCH-compatible child
seat in the rear center seating
position, use the center lower
anchors as shown above.

Tighten the strap according to the
seat maker’s instructions.

Push and pull the child seat
forward and from side-to-side to
verify that it is secure.

Reinstall the dual deck cargo shelf.

Pull down the cover to access the
tether anchor.

Follow step 1 through 4 as
described previously to secure the
child seat.

Remove the head restraint (see
page

). Make sure the

removed head restraint is secured
in the cargo area. Reinstall the
head restraint when the child seat
is removed.

1.

8.

9.

7.

2.

3.

102

Using the Center LATCH

Installing a Child Seat

46

TETHER ANCHOR

CENTER LOWER ANCHORS

COVER

10/07/09 18:14:25 31SWA640_051

Advertising
This manual is related to the following products: