HONDA 2011 CR-V - Manual (Page 94)

Push and hold the front of the
master door lock switch on the
driver’s door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
Make sure the shift lever is in the
Park (P) position.
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.
Push and hold the brake pedal,
and move the shift lever out of the
Park (P) position.
Push and hold the front of the
master door lock switch on the
driver’s door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
Turn the ignition switch to the
LOCK (0) position.
Release the switch, and within 20
seconds, turn the ignition switch
to the LOCK (0) position.
Release the switch, and within 20
seconds, turn the ignition switch
to the ACCESSORY (I) position.
Move the shift lever to the Park
(P) position.
1.
3.
2.
3.
4.
4.
5.
6.
Locks all doors and the tailgate when
the vehicle’s speed reaches about 10
mph (15 km/h).
To program the Drive Lock mode:
Door Locks
88
10/07/09 18:20:19 31SWA640_093