HONDA 2011 CR-V - Manual (Page 368)

Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
(Driver’s side)
Reinstall the fuse box in place
securely.
Open the tailgate. Place a cloth on
the edge of the cover to prevent
scratches. Remove the covers by
carefully prying on the edge with a
small flat-tip screwdriver.
2.
3.
4.
5.
6.
1.
Lights
Replacing Rear Bulbs
362
On the passenger’s side
BULB
SOCKET
COVER
10/07/09 18:56:50 31SWA640_367