Yamaha PSR-540 - Manual (Page 81)

81
BEAT
Song Recording
Sv? SONG 001.MID –
79
9
Press the [NEXT] button to display the Record ready screen.
The beat indicator dots will flash at the currently set tempo, indicating that the
record ready (Synchro Start) mode is engaged.
10
Start recording.
• If you’ve selected [Melody] or [Mel + Acmp] in step #8 above, recording
starts as soon as you play a key.
• If you’ve selected [Acmp] in step #8 above, the auto accompaniment and
recording start simultaneously as soon as a chord is played in the auto
accompaniment section of the keyboard (the left side of the split point).
• Recording can also be started by pressing the [START/STOP] button.
• Auto accompaniment cannot
be turned on or off during
recording.
11
Stop recording.
• If you’ve selected [Melody] in step #8 above, press the [START/STOP]
button.
• If you’ve selected [Acmp] or [Mel + Acmp] in step #8 above, press the
[START/STOP] button or the [ENDING] button. If you press the [END-
ING] button while recording the auto accompaniment track, recording will
stop automatically after the ending section has finished.
12
Select whether to save the newly recorded data to disk or
not.
• To cancel the save operation (for example, when you wish to redo the record-
ing), press the [-/NO] button and re-record starting with step #8 above, after
the display returns to the Track selection screen.
• To save the data to disk, press the [+/YES] button.
13
Press the [RECORD] button to exit from the Record mode.
CAUTION
• While the file is being
saved, never eject the
floppy disk or turn the
power off.
Song Recording
Executing 72%
Completed
The Save operation is completed...