M-AUDIO EQMan - Manual (Page 19)

19
The EQ Flat button automatically flattens (sets gains to 0 dB) all EQ
bands. This basically acts as an EQ bypass and does not affect the
volume settings. When Flat is pressed again, the previous EQ settings
are restored. In effect, the Flat button is a handy way to compare your
current EQ settings with a bypass setting.
The Map Button
The Map button accesses the current program map in Remote Control
application memory. When pressed, it pops up the following dialog
box:
Fig. 7 goes here
Local Program Change Map
Each program location and its name are displayed. The radio button
next to the current program is selected. Select another program by
clicking on the radio button next to it and press OK. You may also
rename a program by clicking on its radio button and then pressing
Rename. You will be prompted for a new name of 16 characters or less.