M-AUDIO EQMan - Manual (Page 28)

28
F0H, 00H, 01H, 05H, 01H, 00H, 01H, 00H, 0nH, 42H, 0pH, F7H
where: n is MIDI Channel (0..15, 7FH=all),
p is the Rom program number (0..16).
Dump All Request
Requests the current settings of all EQ bands and both volume controls,
plus the contents of all EQMan Rom programs. The response is several
sysex messages: sixteen One Rom Program Data messages followed by
one Current EQ/Volume Data message.
F0H, 00H, 01H, 05H, 01H, 00H, 01H, 00H, 0nH, 43H, F7H
where: n is MIDI Channel (0..15, 7FH=all).
The following system exclusive message is transmitted by the EQMan
in response to an Identity Request sysex message:
Identity Message
Identifies the MIDI device as an EQMan.
F0H Non-realtime sysex message header.
7EH
0nH
n = midi channel (0..15, or 7Fh for all)
06H General information message.
02H Identity reply.
00H Midiman manufacturer’s code 00,01,05.
01H
05H
01H
Device family code 0001H.
00H
01H
Device family member code 0001H.
00H
VLH
Software version LSB.
VMH Software version MSB.
RLH Software revision LSB.
RMH Software revision MSB.
F7H End of sysex.
The following system exclusive message(s) may be written to the
EQMan or transmitted by the EQMan in response to a request: