Candy PC PVD 830 N - Manual (Page 12)

- Press the buttons + or - under the display until it begins flashing.
- Press + or - to set the desired time.
- Press the “Timer” button to confirm the selection.
· Countdown Function
- Unblock the cooking surface by keeping the “key button” pressed down for 3 seconds until the “indicator light
button” is switched off.
- Press the “Timer” button until the writing “00” appears on the display.
- Press + or - to select the number of the minutes.
- Press the “Timer” button to confirm the selection.
At the end of the set time, an acoustic signal will be activated.
· Safety Systems
1. In the instance where an object is placed over the controls, the cook top will switch off and the auto-protection
system will activate automatically, this occurs even in cases of liquid spills (water, milk, etc.) over the controls zone.
2. The commands keyboard has an internal temperature sensor that, in the case that the internal temperature
reaches 90° (abnormal use conditions of the surface without pots) the surface will automatically enter in an automatic
system of temperature limitation: switching itself off automatically.
WARNING : when a cooking zone is switched off, the surface of the cook top has a very high and dangerous
temperature level.
The danger is highlighted by the fact that the “cooking zone display” will flicker until the temperature of the surface
will not decrease to under 50°C.
AFTER-SALES SERVICE
Before contacting the Technical Assistance Service
If the hob does not operate at all, we advise you to:
- check that the plug has been inserted into the power socket correctly
If you cannot identify the cause of the operating anomaly:
switch off the appliance (do not subject it to rough treatment) and contact the Technical Assistance Service.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE
ABOVE WARNINGS.
Declaration of conformity: The parts of this appliance which may come into contact with foodstuffs conform to the
prescriptions set out in EEC Directive 89/109 and the Decree Law of enforcement, number 180 dated 25/01/92.
CE Appliance conforms to the European Directives 89/336 EEC, 73/23 EEC and subsequent modifications.