Panasonic SDR-S10 - Manual (Page 4)

4
VQT1E14
∫ EMC Electric and magnetic
compatibility
This symbol (CE) is located on the rating
plate. (EB/EP only)
IF THE POWER CORD OF THIS
EQUIPMENT IS DAMAGED, IT MUST BE
REPLACED WITH AN ELECTRICALLY
APPROVED POWER CORD.
Use only the recommended accessories.
≥ Do not use any other AV cables and
USB connection cables except the
supplied one.
≥ When you use the cable which are sold
separately, please make sure to use the
one whose length is less than 3 m.
CAUTION!
≥ DO NOT INSTALL OR PLACE
THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN
ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR
FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT
CURTAINS AND ANY OTHER
MATERIALS DO NOT
OBSTRUCT THE VENTILATION
VENTS.
≥ DO NOT OBSTRUCT THE UNIT’S
VENTILATION OPENINGS WITH
NEWSPAPERS, TABLECLOTHS,
CURTAINS, AND SIMILAR
ITEMS.
≥ DO NOT PLACE SOURCES OF
NAKED FLAMES, SUCH AS
LIGHTED CANDLES, ON THE
UNIT.
≥ DISPOSE OF BATTERIES IN AN
ENVIRONMENTALLY FRIENDLY
MANNER.
The socket outlet shall be installed
near the equipment and easily
accessible.
The mains plug of the power
supply cord shall remain readily
operable.
To completely disconnect this
apparatus from the AC Mains,
disconnect the power supply cord
plug from AC receptacle.
∫ How to replace the Fuse
(Only for Hong Kong Special
Administrative Region of China
and Saudi Arabia)
The location of the fuse differ
according to the type of AC mains
plug (figures A and B).
Confirm the AC mains plug fitted and
follow the instructions below.
Illustrations may differ from actual
AC mains plug.
1) Open the fuse cover with a
screwdriver.
2) Replace the fuse and close or
attach the fuse cover.
Fuse cover
Figure A Figure B
Figure A Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
VQT1E14(EB_GC_ENG).book 4 ページ ２００７年２月２８日 水曜日 午後２時２３分