Panasonic SDR-S10 - Manual (Page 98)

Others
98
VQT1E14
Messages
CANNOT RECORD. Data writing to the SD card has failed.
NO DATA.
There are no motion pictures or still pictures
recorded on the SD card.
If this message appears although data is recorded
on the SD card, the condition of the card is probably
not stable.
Turn off the power and then turn it on again.
THIS CARD CANNOT
RECORD IN VIDEO MODE. An 8 MB or 16 MB SD card has been inserted in
video recording mode.
CHECK CARD.
This card is not compatible or it cannot be
recognised by the unit.
CARD LOCKED.
The write protection switch on the SD card is set to
LOCK. (l 17)
CARD FULL.
The SD card is full or the number of scenes or
programmes has reached the maximum limit so no
further data can be recorded. Delete unnecessary
scenes (l 66) or insert a new SD card.
SCENE NUMBER IS FULL.
CANNOT RECORD. THE
NUMBER OF PROGRAM IS
FULL.
CARD DOOR OPENED. The card/battery door is open. Close it.
ERROR OCCURRED.
RECORDING IS STOPPED.
≥ When using an SD card that can be used for
motion picture recording (l 17)
When this message appears, it is recommended
that you format the SD card being used. (l 70)
When an SD card is formatted, all the data recorded
on it will be deleted. Back up the data on the SD
card to a computer, etc. before formatting the SD
card.
≥ When using any other card
Use a Panasonic SD card or another SD card which
can be used to record motion pictures. (l 17)
VQT1E14(EB_GC_ENG).book 98 ページ ２００７年２月２８日 水曜日 午後２時２３分