Acclaim Lighting XB-R1 Setup tool - Manual (Page 10)

User’s Manual
10
Auto Fadetime: 0%-100%.
Select the “Confirm” item and press the multi-selector, LCD will show you the above display.
(When adjusting relevant parameters, the being-controlled LEDs will respond sensitively.
The LEDs will briefly flash for several seconds during data sending.)
(3) MANUAL Work Mode:
 If you set the Work Mode as “MANUAL”, the LCD-display will immediately show you as below:
You can rotate the multi-selector clockwise or anticlockwise to select relevant item, then use the
multi-selector to set or confirm your setting.
In the MANUAL Work Mode, relevant parameters are as below:
Unit Group: 1-100.
Unit Number: 1~999
Blue/Duration: 0%-100%
Red /Speed: 0%-100%
Green/Dimmer: 0%-100%
Select the “Confirm” item and press the multi-selector, LCD will show you the above display.
(When adjusting relevant parameters, the being-controlled LEDs will respond sensitively.
The LEDs will briefly flash for several seconds during data sending.)
↑
Auto Program: xxx
>
Auto Speed: xxx
>
Auto Fadetime: xxx % >
Confirm to send >
↑
Blue/Duration: XXX % >
Red /Speed:
XXX
% >
Green/Dimmer: XXX % >
Confirm to send >
Setup With Answer
LED Unit Setup
Data Sending！
Please Wait…
< ID: XXX…
>
Unit Group: XXX
>
Unit Number: XXX
>
↓
Work Mode:MANUAL >
↑
Blue/Duration: XXX % >
Red/Speed: XXX % >
Green/Dimmer: XXX % >
Confirm to send >
Setup With Answer
LED Unit Setup
Data Sending！
Please Wait…