Acclaim Lighting XB-R1 Setup tool - Manual (Page 5)

User’s Manual
5
*For your reference, we respectively take the RGB, AUTO and MANUAL modes for example:
(1) RGB Work Mode:
In RGB Work Mode, user can rotate the multi-selector clockwise or counterclockwise to select
relevant items (Unit
Number: 1~999, Glide Effect: Yes/No, Address Set: 1~512). Press the multi-
selector to enter your selected item, and then rotate the multi-selector to set desired value and then
press it to confirm your setting.
Select the “Confirm” item and press the multi-selector, LCD will show you the above display.
(The being-controlled LEDs will briefly flash for several seconds during data sending.)
(2) AUTO Work Mode:
 If you set the Work Mode as “AUTO”, the LCD-display will immediately show you as below:
User can rotate the multi-selector clockwise or counterclockwise to select relevant item, and then use
the multi-selector to adjust or confirm your setting.
In the AUTO Work Mode, relevant parameters are as below:
Preset Programs: Programs 1-10 and Program “AUTO” (a sequence of these 10 programs.)
Auto Speed: 1~100. Auto Fadetime: 0%~100%.
Select the “Confirm” item and press the multi-selector, LCD will show you the above display.
(When adjusting relevant parameters, the being-controlled LEDs will respond sensitively.
The LEDs will briefly flash for several seconds during data sending.)
When the cursor is at this position,
pressing the multi-selector will return
to the above display page(II).
↑
Work Mode: RGB >
Glide Effect: XXX >
Address Set: XXX >
Confirm to send >
Unit Number Mode
LED Unit Setup
Data Sending！
Please Wait…
< Unit Number : XXX
>
Work Mode: AUTO >
Auto Program: XXX
>
↓
Auto Speed: XXX
>
↑
Auto Program: xxx >
Auto Speed: xxx >
Auto Fadetime: xxx % >
Confirm to send >
Unit Number Mode
LED Unit Setup
Data Sending！
Please Wait…
Auto Fadetime:
XXX
% >
Confirm to send >
Selective Copy >
Copy to all >