Fes7610, 2 vga driver utility – Acnodes FES 7610 User Manual
Page 29
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FES7610
Fanless Embedded Controller comes with
Intel Celeron M ULV 1.0GHz Processor
3-2-1. Installation of VGA Driver:
To install the VGA Driver, simply follow the following steps:
1.
Place insert the Utility Disk into Floppy Disk Drive A/B or CD ROM drive.
2.
Under Windows 9X/ NT4.0/2000/XP system, go to the directory where VGA driver is located.
3.
Click Setup.exe file for VGA driver installation.
4.
Follow the instructions on the screen to complete the installation.
5.
Once installation is completed, shut down the system and restart in order for the changes to
take effect.
Under the Windows 98 system, after rebut computer, there will have two error messages ap-
pear, "Can't find ikch8xx.cat and isb8xx.cat", just skip the messages, they will not cause any effects.
3.2 VGA Driver Utility
The VGA interface embedded with our FES-7610 can support a wide range of display. You can dis-
play CRT, LVDS simultaneously with the same mode.