Acnodes FES 7610 - Manual (Page 50)

© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
FES7610
Fanless Embedded Controller comes with
Intel Celeron M ULV 1.0GHz Processor
DELAYED TRANSACTION:
The chipset has an embedded 32-bit posted write buffer to support delay transactions cycles. Select
Enabled to support compliance with PCI specification version 2.1.
AGP APERTURE SIZE:
This field determines the effective size of the Graphic Aperture used for a particular GMCH configura-
tion. It can be updated by the GMCH-specific BIOS configuration sequence before the PCI standard
bus enumeration sequence takes place. If it is not updated then a default value will select an aperture
of maximum size.
ON-CHIP VGA :
By default, the On-Chip VGA or chipset-integrated VGA is "Enabled".
ON-CHIP FRAME BUFFER SIZE: (depend on chipset)
The On-Chip Frame Buffer Size can be set as 1MB or 8MB. This memory is shared with the system
memory.
BOOT DISPLAY: (depend on chipset)
Boot Display determines the display output device where the system boots. The options is CRT only.