Acroprint ESP180 Time Stamp - Manual (Page 12)

12 Setup
This end acts as
the Edit Button.
Press to change the
current setting.
This end acts as the
Accept/Advance Button.
Press to accept the current setting
and advance to the next option.
Front of
ESP180 Back of
ESP180
Print Bar on top of ESP180
2.7 Programming overview
To enter the programming mode, insert the key in the bottom of
the unit and turn clockwise. Then, remove the key. The machine
will remain in programming mode until both ends of the print bar
are pressed at the same time or until it reaches the end of the
programming menu cycle.
In the programming mode, the print bar becomes two separate
programming switches (see diagram). The portion closest to the
front, which we call the “Edit Button,” edits the current setting.
Press it to change data. If you hold down the button, the
selections will advance more quickly. The portion closest to the
rear of the printer, which we call the “Accept/Advance Button,”
accepts the setting and advances the procedure to the next option
in the programming menu.
To exit the programming sequence, either press both ends of the
print bar at the same time or continue through the end of the
programming sequence. You may exit the programming sequence
at any time except when customizing printing formats. The
ESP180 will save the new settings and return to the time and date
display.