Acroprint ESP180 Time Stamp - Manual (Page 14)

14 Setup
You should continue to press the Edit Button until the desired
time in minutes appears. Then press the Accept/Advance Button
to accept the display as shown.
Next, the hour will begin to flash. Press the Edit Button until the
desired hour appears. Please be sure the AM or PM setting is
correct. Once again, press the Accept/Advance Button to accept
the display as shown. You will then automatically advance to the
next programming menu option.
NOTE: When you are in the process of setting the time, the clock
will be displayed in a 12-hour format. You will be able later to
take advantage of a separate step in the programming menu to
program the clock to display the time in either a 12-hour or a 24-
hour format. The clock will display minutes only, not tenths or
hundredths.
2.11 Setting the month, date, and year
Next, you will see MO flashing, and the current month will
appear.
You can change the month by pressing the Edit Button. Again,
press the Accept/Advance Button to accept the display you have
chosen.
Then DATE will flash, and the
current date will appear, flashing.
Press the Edit Button until the
desired date appears. Then press
the Accept/Advance Button to
accept the display you have
chosen.
29