Acroprint ESP180 Time Stamp - Manual (Page 6)

6
2.1 Site requirements/safety instructions
The ESP180 can be installed in any normal office environment.
No special wiring or cooling is required. However, do not use the
ESP180 under the following extreme conditions:
• extremely high or low temperature
[temperature range: 0-50°C (32-122°F) required]
• extremely high or low humidity
(humidity range: 0-90% RH required)
Do not place the ESP in any of the following problematic
locations:
• areas of high dust concentration
• areas with chemical fume concentration
• areas with extreme vibration or when placed on an
unstable or unlevel surface
The following cautions should be attended to seriously:
• Please take the time to read and understand all of the
instructions included in this User’s Manual.
• Always follow basic safety precautions to reduce the
risk of fire, injury or electric shock.
• Do not use this product near water or when your hands
or feet are wet.
• Securely install the product on the wall or on a flat
surface where it will not be knocked off.
• The ESP180 has a 6' power cord. Place it in a protected
location where the cord will not be stepped on or tripped
over.
2. Setup
Setup