Acroprint ESP180 Time Stamp - Manual (Page 15)

15
Next, you will see YEAR flashing, and the current year will
appear. As before, press the Edit Button until the desired number
appears. Then press the Accept/Advance Button to accept the
display you have chosen. You will once again automatically
advance to the next item in the programming sequence.
NOTE: The ESP180 will automatically set the day of the week
for you, based on the month, date, and year you have selected.
2.12 Setting the time display option
You may set the clock to display the hour either in the standard
12-hour format or in a 24-hour format. As mentioned in 2.10,
you do not have to set the time to be displayed in the same
format in which it is printed.
Next, you will see DISP flashing, and your current display option
will appear. You can press the Edit Button to change this option
to a 12-hour or 24-hour format.
Then press the Accept/Advance Button to accept the display you
have chosen. You will automatically advance to the next item in
the programming sequence.
2.13 Preset printing combinations
To simplify programming, you may elect any one of twelve preset
printing combinations. You have the option of choosing either a
12-hour or a 24-hour format, which includes minutes (MN) or
hundredths (HU). Caution: To allow for customized print
formats, you must set the preset printing combinations to
“NONE” (see Section 3, Customize printing formats). You will
find additional choices available in this section.
The display will flash PRST, then NONE.
Setup