Set 3rd character code – Acroprint ES900 Electronic Time Recorder User Manual
Page 47
Advertising
ES900 User’s Manual
41
Set 3rd Character Code
1. In this example, the 3rd character is "A". Press CHANGE until the Character Code is
"02" (A). Refer to
“Character Code for Alphanumeric” on pages 64
-
.
2. Press SET.
Refer to the
Change Customized Comments
below to make changes to your customized comments.
Change Customized Comments
Follow the same procedures as outlined above for setting further Character Codes.
C
ODE
M
EANING
F8
Insert Character
F9
Delete Character
FA
Insert Line
Fb
Delete Line
FC
Exchange Line 1 to 2
Fd
Exchange Line 2 to 3
FE
Exchange Line 1 to 3
FF
Delete All
Advertising