Attaching the wire clamp – Acroprint ES900 Electronic Time Recorder User Manual
Page 63
Advertising
![background image](/manuals/248102/63/background.png)
ES900 User’s Manual
57
Attaching the Wire Clamp
1. Remove two screws holding the wire clamp. Refer to
Remove Screws Holding Wire Clamp
below.
Remove Screws Holding Wire Clamp
2. Route the wires through the hole of the wire clamp and secure them with screws. Refer to
Route Wires Through Wire Clamp
below.
Route Wires Through Wire Clamp
Be sure to unplug the unit from the wall outlet before attaching the wire clamp.
:LUHFODPS
7ZRVFUHZV
Wire clamp
Advertising