Acroprint ES900 Electronic Time Recorder - Manual (Page 62)

56
Installing the Ni-Cd Battery
This option allows for printing up to 200 registrations without AC power.
Optional Battery Pack – Order Acroprint Part Number 58-0108-000
1. Open the unit. Refer to Open Unit on page 3 .
2. Remove the battery door screw and battery door.
3. Route the battery wires through the hole over the battery compartment.
4. Plug the battery connector into the 3-prong connector.
5. Place the battery on top of the battery door.
6. Reinstall the battery door and battery door screw.
7. Close the unit. Refer to
“Close Unit” on page 4 .
Install Battery
%DWWHU\
5RXWHZLUHV
WKURXJKKROH
3OXJLQ
&RQQHFWRU