Activeforever Invacare Semi-Electric Home Care Hospital Bed - Manual (Page 21)

SECTION 4—PACKAGING, HANDLING, AND SET-UP
Part No 1114836 21 IVC ™ Bed Series
SECTION 4—PACKAGING,
HANDLING, AND SET-UP
Receiving
1. Count cartons before signing shipping papers.
2. Designate someone at the facility to receive and inspect all merchandise. Use the
master order acknowledgment to check off items as they are received.
3. Compare the number of cartons shipped with the number of cartons actually received
and note such on the consignee copy of the freight bill. Make sure to have the truck
driver sign the copy acknowledging the count.
4. If shortage occurs, IMMEDIATELY contact Invacare Customer Service department.
Unpacking
NOTE: Check all parts for shipping damage. In case of shipping damage, DO NOT use. Contact
Dealer/Carrier for further instruction.
CAUTION
DO NOT plug the power cord into a power source until assembly is complete. To
do so could result in damage or personal injury.
DO NOT attempt to operate bed controls prior to completion of assembly, other-
wise damage to bed components may occur.
Unpacking the Bed Ends
NOTE: For this procedure, refer to
FIGURE 4.1.
5. Remove any loose packing from the
carton.
6. Bed End carton includes:
• Two Universal Bed Ends
• Four Casters (two locking and two
non-locking casters)
• One Drive Shaft Assembly in two
pieces
• One Hand Crank
FIGURE 4.1 Unpacking the Bed Ends
Carton
Hand
Crank
Drive
Shaft
Casters
Packaging
Bed
Ends