Installing/removing cable lock, Ƽ warning, Installing/removing cable lock ƽ warning – Activeforever Invacare Semi-Electric Home Care Hospital Bed User Manual

Page 30

Advertising
background image

SECTION 4—PACKAGING, HANDLING, AND SET-UP

IVC

Bed Series

30

Part No 1114836

2. Inspect the junction box for any damage to the connectors.

3. Ensure that all cable plugs are connected securely.

4. Make sure all cables are routed through the cable lock slots.

5. Securely attach the cable lock. Refer to Installing/Removing Cable Lock on page 30.

6. If damage is found, contact an Invacare Customer Service Representative to report the

damaged items and request appropriate replacement parts or products.

ƽ WARNING

The removal and installation of cables and the cable lock are to be performed by a

qualified technician.

FIGURE 4.11 Inspecting the Bed - Electric Beds

Manual Beds

1. Raise and lower the cranks at the foot of the bed to make sure they work correctly.

Refer to Operating the Manual Bed on page 16.

2. If no damage is found, set-up the bed for use.

3. If damage is found, contact an Invacare Customer Service Representative to report the

damaged items and request appropriate replacement parts or products.

Installing/Removing Cable Lock

ƽ WARNING

The following procedures are to be performed only by a qualified technician.
If the cable lock clips are broken have a qualified technician replace the cable lock.

Otherwise damage or personal injury could result.

NOTE: For this procedure, refer to FIGURE 4.12 on page 31.

BLUE - Head Spring Height Adjustment

Connectors

Through Junction

Box Slots

YELLOW - Foot Spring Height Adjustment

RED - Full electric Hi/Lo Motor

WHITE - DO NOT Use

GREEN - Pendant

Cable Lock

Junction Box

Advertising