Activeforever Invacare Semi-Electric Home Care Hospital Bed - Manual (Page 25)

SECTION 4—PACKAGING, HANDLING, AND SET-UP
Part No 1114836 25 IVC ™ Bed Series
FIGURE 4.6 Adjusting and Reconnecting the Head Section Pull Tube
Installing the Casters
ƽ WARNING
Ensure that the locking casters are installed diagonally from each other and are
locked. Otherwise damage or personal injury could occur.
NOTE: For this procedure, refer to FIGURE 4.7 on page 26.
DEALER NOTE: ALWAYS locate locking caster in the same location on each bed end so that they
will always be assembled diagonally opposite each other when inventory is mixed.
NOTE: Position the two locking casters so that they will be diagonally opposite from one another
when the bed is assembled.
NOTE: If two locking casters are not included with the bed, contact a qualified dealer.
Hitch Pin
Lift-Arm Slot
Clevis Pin
Inner Pull Tube
Outer Pull Tube Adjusting Hole
Side Frame
Clevis Pin
Nylon Washer
Head Spring Pull
Tube
Grommet/Washer
DETAIL "B"
DETAIL "A"
Hitch Pin
Grommet/Washer