Installing the manual crank for hi/lo function – Activeforever Invacare Semi-Electric Home Care Hospital Bed User Manual

Page 31

Advertising
background image

SECTION 4—PACKAGING, HANDLING, AND SET-UP

Part No 1114836

31

IVC

Bed Series

Installing

1. Slide the cables into the appropriate cable lock slots.

2. Depress the cable lock clips.

3. Push the cable lock clips into the locking slots on the junction box, until they click in place.

Removing

1. Compress the cable lock clips firmly.

2. Carefully pull the cable lock away from the junction box.

3. Slide the cable lock off of the cables.

FIGURE 4.12 Installing/Removing Cable Lock

Installing the Manual Crank for Hi/Lo Function

NOTE: For this procedure, refer to FIGURE 4.13 on page 31.

1. Pinch the ears on the input drive shaft

cover to open the cover.

2. Flip the input drive shaft cover up and

push until it attaches to the gear box.
The cross pins will now be accessible.

3. Connect the manual crank to the cross

pins until the spring engages the cross
pins.

4. Unfold the handle on the hand crank.

FIGURE 4.13 Assembling the Drive Shaft

Cable Lock

Slots

Cable

Lock Clip

Cable

Lock Clip

Cable

Lock

Cables

Locking Slot

Locking Slot

Junction Box

Input Drive

Shaft

Cover

Gear Box

Crank

Spring

Ears

Handle

Cross

Pins

Advertising