Activeforever Geemarc AMPLI600 Emergency Response Phone - Manual (Page 18)

18
USING THE TELEPHONE
Answering A Call
During an incoming call, your phone will ring and then the number and/or the
name of the caller will be displayed on the screen, if you have subscribed to
a Caller Display service.
Using the handset
● Lift the handset and speak.
● To end the call, replace the handset.
Hands free
● Your Ampli600 allows you to speak hands free. When the phone rings,
press SPKR. The caller’s voice will be heard through the loudspeaker
and they will hear your voice via the microphone near the SPKR button.
The speakerphone symbol will appear on the display.
● To end the call, press SPKR again.
Using the inductive coupler for hearing aids
● Turn your hearing aid to the ‘T’ setting.
● Use the phone handset as usual but the inductive coupler will feed the
incoming call directly into your hearing aid.
Note: users of digital hearing aids must make sure their aids have been
programmed for use with the ‘T’ setting.
Making A Call
Using the handset
● Lift the handset and when you hear the dialling tone, dial the number
on the keypad.
● To end the call, replace the handset.
Pre-dialling
● Key in the required number without lifting the handset.
● Use
the C key if necessary to cancel and correct a wrong digit.
● Lift the handset and the number will be automatically dialled.
● To end the call, replace the handset.