Activeforever Geemarc AMPLI600 Emergency Response Phone - Manual (Page 25)

25
Play the Emergency SOS Message
Press MUTE
Use ▲ or ▼ to select ‘SET SOS’
Press OK
Use ▲ or ▼ to select ‘SOS SOUND’
Press OK
Use ▲ or ▼ to select ‘PLAY SOUND’
Press OK to play your message
Press C three times to exit
Using the Emergency Contact Telephone
Once the Emergency Contact SOS numbers and the emergency message
have been created and stored, this function is ready for use. Simply press
the red Emergency button on the remote band or telephone base. Once
pressed, the AMPLI600 will automatically dial your emergency contact SOS
numbers starting with number 1. If this number is busy or nobody answers
within 30 seconds, the AMPLI600 will dial the second emergency contact
SOS number. This process will continue until all 6 numbers have been
dialed twice unless someone picks up the call. When a person answers
the emergency call, they will hear the emergency message. The person
must press one of the keypad keys (0-9, * or #) to confirm that the emer-
gency contact SOS message has been received and this will also stop the
AMPLI600 from dialling the next number. The AMPL600 will then turn on
the speakerphone automatically allowing you to speak to the emergency
SOS contact.
EMERGENCY CONTACT