Activeforever Geemarc AMPLI600 Emergency Response Phone - Manual (Page 29)

29
Headset
You can also use your Ampli600 in hands free mode with an optional head-
set, this is ideal for use with a computer screen.
To use the headset
Connect the headset into the headset socket located
at the back of your telephone.
Press the headset key to get the dial tone
Dial the number
To answer a call, press Headset key whilst the phone is ringing
You can adjust the volume and tone level of calls received with the
VOLUME and TONE slide buttons located on the top of the phone (if func-
tion is active) and the sending level with the 3 position switch located on
the right side.
Neckloop
Connect the neckloop into the neckloop socket
located at the back of your telephone.
Press SPKR or lift handset to activate the neckloop and
speak into the microphone on the neckloop or handset respectively
The neckloop also has a volume control
To answer a call, press SPKR or lift handset whilst the phone is ringing
Note: The Ampli600 must be connected to the mains in order to use a neck
loop.
OPTIONAL ACCESSORIES