Acura 2012 TL - Manual (Page 123)

Press the SEL/RESET button to see
the selections. When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
Select ON or OFF by pressing the
INFO (
/ ) button, then enter
your selection by pressing the SEL/
RESET button. If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘KEYLESS ACCESS BEEP’’ and
repeat the procedure again.
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
119
11/01/14 18:14:26 31TK4630_124
2012 TL