Acura 2012 TL - Manual (Page 99)

Refer to the table on the following
pages about the settings you want to
customize.
If you use the key to unlock the
driver’s door, the system cannot
recognize either ‘‘DRIVER 1’’ or
‘‘DRIVER 2.’’
To enter the customizing mode,
press either INFO button (
/ )
repeatedly until ‘‘CUSTOMIZE
SETTINGS’’ is displayed, then press
the SEL/RESET button.
CONTINUED
On models without keyless access
system
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
95
DRIVER’S ID
Press the SEL/RESET
button.
U.S. model is shown.
11/01/14 18:10:46 31TK4630_100
2012 TL