Acura 2012 TL - Manual (Page 128)

When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘AUTO
LIGHT SENSITIVITY’’ and repeat
the procedure again.
Press the SEL/RESET button to see
the selections.
Select the desired setting (MAX,
HIGH, MID, LOW or MIN) by
pressing the INFO (
/ ) button,
then enter your selection by pressing
the SEL/RESET button.
Multi-Information Display
124
11/01/14 18:15:14 31TK4630_129
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
2012 TL