Installing a child seat, 2012 tl – Acura 2012 TL User Manual
Page 56
Advertising

Lift the anchor cover, then attach
the tether strap hook to the
anchor, making sure the strap is
not twisted.
Tighten the strap according to the
seat maker’s instructions.
Follow steps 2 and 3 in the
previous column.
After properly securing the child
seat (see page
), adjust the
head restraint to its lowest
position, then route the tether
strap over the head restraint.
1.
2.
3.
2.
Using the Center Anchor
Installing a Child Seat
52
TETHER STRAP
HOOK
COVER
ANCHOR
11/01/14 18:02:59 31TK4630_057
Dr
iv
er
and
P
asseng
er
Saf
e
ty
2012 TL
Advertising
This manual is related to the following products: