Acura 2012 TL - Manual (Page 561)

Start the engine. If you are
replacing a driver’s side bulb, turn
the steering wheel all the way to
the right. If you are replacing a
passenger’s side bulb, turn the
steering wheel to the left. Turn off
the engine.
Use a wrench to remove the
mounting bolts, and remove the
holding clip with a flat-tip
screwdriver. Use a flat-tip screwdriver to
remove the holding clips from the
edge of the inner fender cover,
and pull the inner fender cover
back.
Pull down the under cover from
the bumper carefully.
3. 2.
1.
4.
CONTINUED
Replacing the Front
Side Marker Light Bulb
Lights
Ma
int
e
na
nce
557
HOLDING CLIP
UNDER COVER
BOLT
HOLDING CLIP
BOLT
11/01/14 19:31:36 31TK4630_562
2012 TL