Garmin GPS III Pilot - Manual (Page 42)

Change fields— allows you to choose the data displayed on the six user-selectable
data fields. Available data types are: Altitude, Average (Avg) Speed, Battery (Bat)
Timer, Max Speed, Odometer, Speed, Sunrise (at present position), Sunset (at pre
sent position), Track, Trip Odometer, Trip Timer, User Timer and Voltage. See
page 98 for descriptions of navigation terms.
To change a data field:
1. Highlight ‘Change Fields’ and press ENTER.
2. Highlight the data field you wish to change (using the rocker keypad) and press ENTER.
3. Select the type of data you want to appear on this field and press ENTER.
Restore Defaults— resets all data fields to the factory default settings.
To restore the factory default settings, highlight ‘Restore Defaults’ and
press ENTER.
‘Change Fields’ allows you to
custom tailor the information
that appears on the Position
Page. Select the desired data
type from the list.
‘Restore Defaults’ will over-
ride any data field changes
you’ve made to the Position
Page, reverting back to the
factory default settings.
34
REFERENCE
Position Page Options
GPS III Pilot B2 4/1/99 2:02 PM Page 34