Garmin GPS III Pilot - Manual (Page 75)

To activate a route:
1. Press MENU twice to display the Main Menu.
2. Highlight ‘Routes’ and press ENTER. The Route List is displayed, showing all routes
stored in memory.
3. Highlight the desired route and press MENU to display the Route Options.
4. Highlight ‘Activate’ to navigate the route in sequence, and press ENTER.
The Route List also allows you to enter your own 13-character name for any list-
ed route. By default the name includes the first and last waypoints in the route.
To enter a custom route name:
1. Follow steps 1 and 2 above to display the Route List.
2. Highlight the desired route and press ENTER to display the Route Edit Page.
3. Highlight the route name field (top line) and press ENTER to begin editing.
4. Use the rocker keypad to enter the desired name and press ENTER when finished.
When a route is highlighted on the Route List, additional functions are available
from the Route Options.
To display the Route Options, press MENU (with the Route List
displayed).
The following Route Options are available:
New Route— allows you to create a new route, as described on page 66.
Activate— allows you to navigate the route in the same sequence it was original-
ly created, as described above.
Activating a route tells the
GPS III Pilot you wish to use
this route for navigation
guidance.
Selecting a GOTO destination
along the current route will
take you directly to that way-
point, then continue with the
remainder of the route.
67
REFERENCE
Route List
GPS III Pilot B2 4/1/99 2:02 PM Page 67