Garmin GPS III Pilot - Manual (Page 66)

Delete by Symbol (‘User List’ tab only)— allows you to select a user waypoint
symbol and all waypoints with this corresponding symbol will be deleted from
memory.
Delete All (‘User List’ tab only)— deletes all user waypoints currently stored in
memory.
To delete a user waypoint (or waypoints):
1. Select the desired delete option from the list above and press ENTER.
2. If ‘Delete by Symbol’ is selected, select the desired symbol and press ENTER.
Editing User Waypoints
Once you have created and stored a user waypoint, it may be modified, renamed
or deleted at any time through the Waypoint Edit Page. The Waypoint Edit Page for
any stored user waypoint can be retrieved by selecting the desired waypoint on the
map display, or from the waypoint information pages (‘User Wpt’ or ‘User List’ tabs).
To access the Waypoint Edit Page for a user waypoint:
1. Press the rocker keypad to highlight the desired user waypoint on the map display
and press ENTER. Or,
2. Highlight ‘Waypoints’ from the Main Menu and press ENTER. Select the desired file
tab. If ‘User Wpt’ is selected, press MENU, select ‘Edit Waypoint’ and press ENTER. If
‘User List’ is selected, highlight the desired waypoint and press ENTER.
From the Waypoint Edit Page, highlight the appropriate field to rename a way-
point, change its symbol, edit the comment or edit the position.
To rename the user waypoint:
1. Highlight the waypoint name field and press ENTER.
2. Use the rocker keypad to enter the new waypoint name and press ENTER.
3. If finished, highlight ‘Done’ and press ENTER.
User waypoints can be delet-
ed individually, by common
symbol or all at once. Select
the desired ‘Delete’ option and
press ENTER.
To rename a user waypoint,
enter the new name directly
over the old name and press
ENTER.
58
REFERENCE
Editing User Waypoints
GPS III Pilot B2 4/1/99 2:02 PM Page 58