Garmin GPS III Pilot - Manual (Page 67)

To change the user waypoint’s symbol:
1. Highlight the waypoint symbol field and press ENTER.
2. Use the rocker keypad to select the desired symbol and press ENTER. The selected
symbol will be used to denote the waypoint position on the map display.
When a waypoint is created, the time and date of creation is automatically added
as a waypoint comment. You can edit this information or create an entirely new
comment, as needed.
To edit the user waypoint comment:
1. Highlight the waypoint comment field and press ENTER.
2. Use the rocker keypad to enter the desired comment and press ENTER.
To edit the user waypoint position:
1. Highlight the waypoint coordinates field to change the position coordinates, or
highlight the reference waypoint name, bearing or distance fields to change the
reference waypoint information. Press ENTER to begin editing.
2. Use the rocker keypad to enter the new information. Press ENTER to accept the new
information.
A user waypoint’s position may also be edited, graphically, using the map display.
To move a waypoint’s position on the map display:
1. From the Waypoint Edit Page, press MENU to display the Waypoint Edit Options.
2. Use the rocker keypad to select ‘Show Map’ and press ENTER.
3. Press MENU to display an options window. Select ‘Move Wpt’ and press ENTER.
4. Use the rocker keypad to select the new location for the waypoint and press ENTER.
The default waypoint com-
ment is the time and date the
waypoint was created. You
can enter your own comment
using the rocker keypad.
Edit a user waypoint’s
position by entering the new
position coordinates directly
over the old position.
59
REFERENCE
Editing User Waypoints
GPS III Pilot B2 4/1/99 2:02 PM Page 59