Garmin GPS III Pilot - Manual (Page 50)

Release Hold— cancels the ‘hold’ feature enabled when the ‘Set OBS and Hold’
option was selected. This option returns the GPS III Pilot to automatic sequenc-
ing of waypoints along the active route. However, if an OBS course has been
selected, that course setting will be retained until cancelled (as described on page
41) or until waypoint passage.
To release a waypoint hold and return to automatic sequencing of route
waypoints, highlight ‘Release Hold’ and press ENTER.
Big Numbers— allows you to select a different page layout, with a smaller
compass-type display and two user-selectable, large-character data fields. If
‘Big Numbers’ is selected, ‘HSI’ will appear as an option instead.
To toggle between HSI and Big Numbers page formats, highlight ‘Big
Numbers’ (or ‘HSI’) and press ENTER.
Change Fields— allows you to choose the data displayed on four user-selectable
data fields. There are twenty-nine available data types, including Average (AVG)
Speed, Bearing, Distance, ETA at Destination (DEST), Speed, Time to Destination
(DEST), Track, and a Trip Odometer. See page 98 for descriptions of data terms.
To change a data field:
1. Highlight ‘Change Fields’ and press ENTER.
2. Highlight the data field you wish to change and press ENTER.
3. Select the type of data you want to appear on this field and press ENTER.
Restore Defaults— resets all data fields to the factory default settings.
To restore the factory default settings, highlight ‘Restore Defaults’ and
press ENTER.
‘Big Numbers’ provides a
smaller compass-type display,
with a pointer indicating the
bearing to your destination.
The ‘Change Fields’ option
allows you to select from a list
of available data types. Four
different items may be dis-
played on the HSI Page’s user-
selectable data fields.
42
REFERENCE
HSI Page Options
GPS III Pilot B2 4/1/99 2:02 PM Page 42