Flight management, Approach (appr) – Garmin G1000 Quest Kodiak User Manual
Page 220
Garmin G1000 Pilot’s Guide for the Quest KODIAK 100
190-00590-03 Rev. A
208
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
APPROACH (APPR)
An Approach Procedure (APPR) can be loaded at any airport that has an approach available. Only one
approach can be loaded at a time in a flight plan. The route for a selected approach is defined by designating
transition waypoints.
Figure 5-73 Approach Loading Page - Selecting the Approach
Destination Airport
Selected
Approach
Approaches Available
at KCOS
Approach Waypoint
Sequence
Preview of
Selected
Approach
Barometric
Minimum
Loading an approach procedure into a stored flight plan:
1)
Select a stored flight plan from the Flight Plan Catalog Page.
2)
Press the EDIT Softkey; or press the MENU Key, select ‘Edit Flight Plan’, and press the ENT Key. The Stored
Flight Plan Page is displayed.
3)
Press the LD APR Softkey; or press the MENU Key, select “Load Approach”, and press the ENT Key. The
Approach Loading Page is displayed.
4)
Select an approach. Press the ENT Key.
5)
Select a transition for the selected approach. Press the ENT Key.
6)
Press the ENT Key to load the selected approach procedure.