Garmin G1000 Quest Kodiak - Manual (Page 51)

190-00590-03 Rev. A Garmin G1000 Pilot’s Guide for the Quest KODIAK 100
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
39
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& cNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
39
a
UDio
a
lerts
The Audio Alert Box on the System Setup Page allows the audio alert voice to be set to male or female.
Changing the audio alert voice:
1) Use the FMS Knob to select the System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the voice in the Audio Alert Box.
4) Turn the small FMS Knob to display and highlight the desired voice.
5) Press the ENT Key.
AUX - SYSTEM STATUS PAGE
The System Status Page displays the status and software version numbers for all detected system LRUs.
Pertinent information on all system databases is also displayed. Active LRUs are indicated by green check
marks and failed LRUs are indicated by red ‘X’s. Failed LRUs should be noted and a service center or Garmin-
authorized dealer informed.
Figure 1-34 Example System Status Page
The LRU and ARFRM, Softkeys on the System Status Page select the applicable list (LRU INFO or AIRFRAME
window) through which the FMS Knob can be used to scroll information within the selected window.
Selecting the MFD1 DB Softkey (label background changes to grey indicting the softkey is selected) places
the cursor in the database window. Use the FMS Knob to scroll through database information for the MFD.
Selecting the softkey again will change the softkey label to PFD1 DB. PFD 1 database information is now
displayed in the database window. Selecting the softkey a third time will change the softkey label to PFD2
DB. PFD 2 database information is now displayed in the database window.